Status #14906

Recap of the 2016 Energy Science and Technology Conference. Hi fellow [...]


Covington, Louisiana
via Free Energy
Recap of the 2016 Energy Science and Technology Conference.
Hi fellow free energy enthusiasts! I recently attended the annual ES&T Conference in Hayden, Idaho. It was the most revealing and successful free energy conference ever! I made many new friends and contacts including: Mike Waters, Aaron Murakami, John Bedini, Dr. Peter Lindemann, Paul Babcock, Jim Murray, Eric Dollard, Moray King, Graham Gunderson, Dr. Robert M. Haralick, and more (see: http://energyscienceconference.com/… for the presenters)! I have so much to share with you. I will start with a recap of the major revelations from the conference. Following are the contents of an email Aaron Murakami shared with me:
It's been 10 days since the 2016 Energy Science & Technology Conference ended on Tesla's 160th Birthday and we're still moving at high speed.

This conference was truly historical with a few overunity demonstrations including Graham Gunderson's Magnetic Implosion Transformer that showed over 500% gain in energy on the output compared to the input. Actually, he could dial the input down to zero or even negative so you can calculate that at an infinite COP. Peter Lindemann demonstrated a large version of one of John Bedini's cold electricity generators, which showed a lot more on the output than the input as well as a Bedini SG that had self-rotating batteries and since the batteries were charged, there has been way more taken from the batteries than what is possible by the amp hour rating.

Furthermore, Paul Babcock gave a full disclosure on his motor that produces hundreds of watts beyond the input and Jim Murray disclosed details on his Transforming Generator that also has many anomalous gains, violations of conventional generator theory, 300-400% more lumens per watt with a mercury vapor light and other aspects including the generator that can wind up to self-destruct runaway speeds.

We were joined by several presenters who were first time speakers at our conference, which included Moray King who is one of the most recognized names in the free energy field - he gave an incredible presentation with many pieces of the puzzle necessary for creating a water fueled engine, Michael Waters who has a wind turbine that produces 120 TIMES the electricity compared to a conventional 3 blade turbine - Michael gave many indisputable arguments for open system thermodynamics that shuts down the argument from any conventional physicist or engineer who doesn't believe and Professor Robert Haralick who gave a highly scientific and technical presentation on paramagnetic and diamagnetic experiments, which when fully understood will have highly profound implications in the energy sciences.

John Bedini's presentation details are coming soon...

As usual, Eric Dollard gave a monumental 4.5 hour lecture that gives the most in-depth operating theory on the transverse and longitudinal networks that he demonstrated in the classic Borderland videos from many years ago and it is directly related to the Advanced Seismic Warning System project. Amazingly, there were quite a few attendees in the audience that actually understood much of the presentation!

For myself, my main presentation was on my Plasma Impulse Motor, which appears to demonstrate some keys to how the Gray Motor may have really worked and for the first time at our conferences, I added a couple bonus evening presentations to give everyone as much value for their participation in the conference as possible. The first bonus presentation was on an obscure cold electricity patent that has some astounding claims and is amazingly similar to the "Tesla Switch", which operates a load between two negatives and the other bonus presentation was on a Scotch Yoke Solenoid Motor to show the most efficient way to turn reciprocating motion into rotary motion - the implications are huge in terms of removing all the typical losses associated with conventional connecting rods and crankshaft setups. That translates to low costs for pumping water, compressing air and countless other applications.

Ken Rochon gave a non-energy related presentation, which kicked off the conference to show everyone how to spread the breakthrough energy message with viral campaigns in social media networks!

Below, you will find the tentative release schedule for the conference videos and it is jam-packed! Some weeks, we're releasing 3 videos but this is the only way we can get everything out by the end of August. We'll be sending quite a few emails over the next month, which is quite normal for this time of the year. We apologize if you're not interested in these videos, but for most of the subscribers to these newsletters, our conference videos are the main annual highlight in the field of free energy and breakthrough technologies!

We have HUNDREDS of awesome photos from this conference and even some amazing slideshows to highlight the spirit of the event - we will be posting these soon.

Lives were changed, consciousness was raised and the light on our path just got a whole lot brighter.

If we have another conference next year and you want to be a part of it, register early because this year's conference had all seats sold out 2 months ahead of time. There is no obligation of course and we're not even accepting payments until January 2017 - go here: http://energyscienceconference.com/…

Sincerely,
A & P


7/25/2016 PAUL BABCOCK – BABCOCK DC MOTOR DISCLOSURE
7/27/2016 AARON MURAKAMI - COLD ELECTRICITY CIRCUIT
7/29/2016 PANEL DISCUSSION
8/1/2016 JIM MURRAY – FUNDAMENTALS OF THE TRANSFORMING GENERATOR
8/3/2016 GRAHAM GUNDERSON – MAGNETIC IMPLOSION TRANSFORMER
8/5/2016 MICHAEL WATERS – OPEN SYSTEM PHYSICS AND THERMODYNAMICS
8/9/2016 PETER LINDEMANN - BEDINI SG: BEYOND THE ADVANCED HANDBOOK
8/11/2016 KEN ROCHON - USING SOCIAL MEDIA TO SPREAD THE BREAKTHROUGH ENERGY MESSAGE
8/15/2016 ERIC DOLLARD – ELECTRICAL TRANSMISSION IN MULTIPLE COORDINATE SYSTEMS
8/18/2016 MORAY B. KING – FROM NANOBUBBLES TO BALL LIGHTNING: AN OVERVIEW OF NEW ENERGY POSSIBILITIES
8/23/2016 PROFESSOR ROBERT M. HARALICK – PARAMAGNETIC AND DIAMAGNETIC FIELD EXPERIMENTS
8/25/2016 AARON MURAKAMI – PULSED PLASMA MOTOR – KEY TO THE GRAY MOTOR?
8/27/2016 AARON MURAKAMI - SCOTCH YOKE BOB TEAL MOTOR
Trygve
Ed,

What is Mike Water's wind turbine like? Do you have any pictures? Are there plans or can you buy one of these anywhere?

Also, which of these technologies do you think would be the easiest to make and start getting free energy from.

I would like to build something to generate free energy for charging batteries. Which technology do you recommend?

Thanks,

Trygve
Friday 29 July 2016, 23:25:58
Ed Becnel
Hi Trygve! The most promising and practical form of "free" energy is ethanol production. Aaron is assisting me with this and connecting me with the right people to help in this technology. Second in line is Mike Waters' wind turbine. I will email a computer rendition of it. Mike Waters told me that he has access to other solid state devices but they are patented and we would have to work with Mike to determine if or how we could utilize those. I haven't seen the devices, but he asserts they are real free energy solid state devices. I will ask Mike specifically about this. Then, there is Paul Babcock's DC magnetic motor. You can purchase the material on it and his presentation from the conference from http://emediapress.com/
Sunday 31 July 2016, 04:07:15
Ed Becnel
Jeff Henry and I are working with Mike to arrange for manufacturing his wind turbine in a future Ubuntu Native American community. Let's meet with Jeff so he can fill you in on the details.
Sunday 31 July 2016, 04:08:48
Ed Becnel
I can also talk to Graham Gunderson about his implosion transformer as I am in touch with him on FaceBook
Sunday 31 July 2016, 04:12:03
Ed Becnel
Here is a computer rendition of the wind turbine along with a description of what makes it so efficient and the simple principle of its efficient operation. It makes you wonder why the existing wind turbines are designed the way they are today: http://cureforglobalcrises.com/…
Sunday 31 July 2016, 04:41:50
Ed Becnel
Sorry, that link is WIP. Use this one instead: http://cureforglobalcrises.weebly.com/…
Sunday 31 July 2016, 04:43:57
Trygve
It would be interesting to try to manufacture one of these Waters turbines and mount it to a standard Coleman home wind turbine ($500). Here is a link to that device. http://cabelas.com/product/… It seems like if this is possible, it would be easy to do before and after tests for comparison.
Monday 1 August 2016, 16:52:17
Ed Becnel
We'd have to know what the RPM and torque rating is to try to mount it to this turbine. Besides, I'm sure Mike Waters has the complete specs for building the entire device. If we wanted to do this from scratch, then yes, we could pull the blades off the Coleman turbine and replace with the more efficient Waters design.
Tuesday 2 August 2016, 19:11:13
Trygve
Ed, Buying a $500 400W Coleman wind turbine would immediately give me everything I need except the Waters turbine design. If there was a way to buy or make a Waters turbine sized to fit this Coleman machine, tests could be run to measure before and after efficiency ratings. I think it is important to generate data that supports Mike's claims and then demonstrate it to the world via YouTube. If Mike has a complete wind power generator (or the design) available for purchase, I would be interested in that too. The attractive things about the Coleman product is the price, availability and ability to compare the three blade design to the Waters design.
Wednesday 3 August 2016, 14:59:43
Toni L
Awesome
Friday 5 August 2016, 15:37:23
Ed Becnel
I'll ask Mike about the availability of his wind turbine and what your plans are for it and get back with you asap
Sunday 7 August 2016, 03:25:13
Please login to make a comment

© 2014 - 2019 Prepare For Change
Prepare For Change is powered by Coeō © 2014 - 2019 Coeō (Matthew Dowle) | Designed and developed by Matthew Dowle | Coeō Terms and Conditions / Legal | Sitemap